Engine Timing belts and Chains

As your engine runs, the intake valves need to open to allow air into the engine.  They remain closed while the air and fuel are compressed and ignited, powering the piston.  Then the exhaust valves open to release the exhaust.  This all must be timed very precisely.  It is the job of the timing belt or timing chain to make sure all of this is synced up properly.

Timing belts are made of a very tough compound that can last for tens of thousands of miles.  Timing chains are made of metal and last for a very long time as well.  If your vehicle has a timing belt, your owner’s manual has a schedule for replacing the belt.  If your vehicle has a timing chain, there may not be a specified schedule for replacing it, but that doesn’t mean that the timing chain system is indestructible and never needs attention.

For example, the chain runs on sprockets on the crankshaft and the camshafts.  A broken tooth on a sprocket can cause the chain to slip a little.  When timing is off a little your engine will not run as smoothly.  When timing is off enough your engine won’t run at all and could even be severely damaged.  There is also a tensioner that keeps appropriate pressure on the timing chain.  This keeps the chain tight while allowing it to absorb pulsations from the engine.  The tensioner can wear out.  There are also guide rails that keep the chain on the proper path that can become worn.

The bottom line is that at some time, one or more of the timing chain system components will become worn to the point that they are no longer performing within specification.  Your service advisor can help you with recommendations for when timing chain components should be replaced on your vehicle and have it inspected for signs of timing chain system wear.

Since timing chains are lubricated by engine oil, staying on top of your regular oil changes is very important to prolong its life.  Always use a high-quality oil filter and oil of the recommended type and grade.

Broken timing belts very often cause serious engine damage. Let’s check to see what the manufacture’s recommendation for replacement and avoid the possible damage.

Give us a call 763-420-3060

We have been proudly serving the; Corcoran, Medina, Maple Grove, Plymouth, Rogers, Dayton and Hanover communities since 1983.

Pro-Tech Auto Repair Inc
7591 Commerce Street
Corcoran, MN 55340
763-420-3060
http://pro-techauto-repair.com

 


tomgleason

Leave a Reply

Your email address will not be published. Required fields are marked *